Economizer – Pre-machined bar
Pre-machined, alloyed tool steel with machining allowance. Both bar ends saw cut.
Available in flat lengths of 500 mm or 1000 mm from stock and therefore rapid delivery.
Tolerances
Thickness: -0.00/+0.20 mm
Width: -0.00/+0.40 mm
Square: +0.40/+0.40 mm
Length: +5.00/+30.00 mm
- Thickness and width of material in ground/fine milled execution
- Both bar ends saw cut
- Surface roughness max. 3.2 µm
- Rust protected, wrapped in VCI-paper
- Available in 500 mm or 1000 mm, 2000 mm lengths