D2 TOOL STEEL ECONOMIZER

Pre-machined, D2 tool steel with machining allowance. Both bar ends saw cut.

D2 is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength.

Tolerances

Thickness: -0.00/+0.20 mm
Width: -0.00/+0.40 mm
Square: +0.40/+0.40 mm
Length: +5.00/+30.00 mm

  • Thickness and width of material in ground/fine milled execution1
  • Both bar ends saw cut
  • Surface roughness max. 3.2 µm
  • Rust protected, wrapped in VCI-paper

Shop online

D2 Economizer – Pre-machined – Sold in 500 or 1000 mm Lengths

 Thickness:
2.2 3.2 4.2 4.4 5.2 6.2 6.4 8.2 8.4 10.4 12.4 15.4 16.4 20.4 22.4
 Width: 8.2 X
10.4 X X X X X X X
12.4 X
15.3 X X X
15.4 X X X X X X X X X
16.4 X
20.3 X X X
20.4 X X X X X X X X X X X
25.4 X X X X X X X X X X X X
30.4 X X X X X X X X X X X X X
32.4 X X X X X X X X X X X X X
40.4 X X X X X X X X X X X X
50.4 X X X X X X X X X X X X X
60.4 X X X X X X X X X X X X
63.4 X X X X X X X X X X X X X
70.4 X X X X X X X X X X X X X
80.4 X X X X X X X X X X X
90.4 X X X X X X X X X X X X X
100.4 X X X X X X X X X X X X
110.4
120.4 X X X X X X X
125.4 X X X X X X X X X X X
130.4 X X X
140.4 X X X X X X
150.4 X X X X X X X X
156.4
160.4 X X X X X X X X
180.4 X X X X X X X
196.4 X X X
200.4 X X X X X X X X
246.4
250.4 X X X X X X X X
300.4 X X X X X X X X
400.4 X X X
405 X X X X
505 X X
Thickness
Width 25.4 27.4 30.4 32.4 36.4 40.4 46.4 50.4 56.4 60.4 70.4 80.4 100.4 120.4 150.4
8.2
10.4
12.4
15.3
15.4
16.4
20.3
20.4
25.4 X
30.4 X X
32.4 X X X
40.4 X X X X
50.4 X X X X X
60.4 X X X X X X
63.4 X X X X X X
70.4 X X X X X X X X
80.4 X X X X X X X X
90.4 X X X X X X X X X
100.4 X X X X X X X X X X X
110.4 X X X
120.4 X X X X X X X X X X
125.4 X X X X X X X X
130.4 X X X X
140.4 X X X X X X X X
150.4 X X X X X X X X X X
156.4 X
160.4 X X X X X X X X
180.4 X X X X X X X X
196.4 X X X X
200.4 X X X X X X X X X
246.4 X
250.4 X X X X X X X
300.4 X X X X X X
400.4 X X X
405 X X X X X X X
505 X X X