EN19 Economizer – Pre-machined bar

Pre-machined, EN19 steel with machining allowance. Both bar ends saw cut.

EN19 steel (42CRMO4 / 1.7225)  is renown for its wear resistance properties and is often used where high strength properties are required. Suitable for gears, shafts, spindles, etc.

Shop Online

Tolerances

Thickness: -0.00/+0.20 mm
Width: -0.00/+0.40 mm
Square: +0.40/+0.40 mm
Length: +5.00/+30.00 mm

  • Thickness and width of material in ground/fine milled execution
  • Both bar ends saw cut
  • Surface roughness max. 3.2 µm
  • Rust protected, wrapped in VCI-paper

EN19 Economizer – Pre-machined – Sold in 500 or 1000 mm Lengths

 Thickness:
2.2 3.2 4.2 5.2 6.2 8.2 10.4 12.4 15.4 20.4 25.4 30.4 35.4 40.4 50.4 60.4 80.4
 Width: 33 X X X X X X X X X X X X
43 X X X X X X X X X X X X X X
53 X X X X X X X X X X X X X X X
63 X X X X X X X X X X X X X X X X
73 X X X X X X X X X X X X X X X X
83 X X X X X X X X X X X X X X X X X
93 X X X X X X X X X X X X X X X X X
103 X X X X X X X X X X X X X X X X X
123 X X X X X X X X X X X X X X X X X
143 X X X X X X X X X X X X X X X X X
153 X X X X X X X X X X X X X X X X X
163 X X X X X X X X X X X X X X X X X
183 X X X X X X X X X X X X X X X X X
203 X X X X X X X X X X X X X X X X X
223 X X X X X X X X X X X X X X X X X
243 X X X X X X X X X X X X X X X X X
263 X X X X X X X X X X X X X X X X X
283 X X X X X X X X X X X X X X X X X
303 X X X X X X X X X X X X X X X X X
353 X X X X X X X X X X X X X X X X X
403 X X X X X X X X X X X X X X X X X
453 X X X X X X X X X X X X X X X X X
503 X X X X X X X X X X X X X X X X X

Call 01902 716333 for nationwide tool steel delivery.

BS 970 1991 BS 970 1955 EN AISI/SAE Werkstoff
708M40 EN19 4140 1.7225